Former name: Cubex Aquarius B
The Sandvik DU431-W is a In-The-Hole (ITH) center-articulated drill, equipped with Wassara hydraulic In-The-Hole (ITH) hammers, powered with high pressure water from an onboard water booster, and drilling with a boom mounted mast. The Aries B is equipped with the same options as the standard Aquarius with the additional capabilities of a boom-mounted mast for ease of positioning and drilling.
|
- Boom-mounted mast makes drill setup and positioning simple even in hard to reach locations
- High accuracy drilling and high productivity with Wassara water hammers deliver enhanced mine profitability with the lowest cost per ton
- Very flexibly and highly capable drill can be customized to meet almost any mine requirement
|
|
Boom type |
Versatile
|
Hole diameter |
60 mm — 165 mm (2″¼ – 6″½)
|
Hole length |
more than 100 m (300′)
|
Hammer |
Wassara |
W50 — W120
|
Major Components |
Boom extension |
1219 mm (48″)
|
Parallel coverage |
7213 mm (284″)
|
Min drilling to the wall |
|
with carousel |
560 mm (22″)
|
w/o carousel |
280 mm (11″)
|
Roll over |
360°
|
On-board booster flow |
350 l /min at 179 bar
(93 gpm at 2 600 PSI)
|
Carousel max capacity |
16 tubes
|
Max hole length with carousel |
31 m (102′)
|
Operating drift dimensions |
Min operating height* |
3150 mm (124″)
|
Min operating width* |
3150 mm (124″)
|
Tramming drift dimensions |
Min tramming height |
3000 mm (118″)
|
Min tramming width |
2750 mm (108″)
|
Tramming length |
10869 mm (428″)
|
Speed – Max. |
10 km/h (6.21 mph)
|
Gradeability |
35%
|
Ground clearance |
216 mm (8″½)
|
Total input power |
167 kW (222 HP)
|
Weight |
21772 kg (48000 lb)
|
|